Aluminium Tambaga jeung Bimetallic tipe Panyambungna
Data Téknis
| Modél | Konduktor cross-bagian (mm2) Kalawan 6-50 Al 16-70 | Bolts |
| CAPG-A1 | Kalawan 10-95 Al 25-150 | 1×M8×40 |
| CAPG-A2 | Kalawan 6-50 Al 16-70 | 1×M8×45 |
| CAPG-B1 | Kalawan 10-95 Al 25-150 | 2×M8×45 |
| CAPG-B2 | Kalawan 25-185 Al 35-200 | 2×M8×50 |
| CAPG-B3 | Kalawan 6-50 Al 16-70 | 2×M10×60 |
| CAPG-C1 | Kalawan 10-95 Al 25-150 | 3×M8×45 |
| CAPG-C2 | Kalawan 25-185 Al 35-240 | 3×M8×50 |
| CAPG-C3 | Kalawan 35-240 Al 35-300 | 3×M10×60 |
| CAPG-C4 | 3×M10×70 |
Bahan
alloy aluminium kakuatan tinggi ku forging.Perlakuan permukaan: Caang.
sipat produk
ALPG dipaké pikeun nyambungkeun atawa branching AAC, AAAC atanapi ACSR konduktor overhead.Forging nyiptakeun clamp kakuatan tinggi.liang Slotted ngamungkinkeun adjustment pikeun varying konduktor dina saban gigir.Uji jinisna saluyu sareng IEC61238-1.
Data Téknis
| Modél | Konduktor cross-bagian (mm2) | Bolts |
| APG-A1 | Al 16-70 | 1×M8×40 |
| APG-A2 | Al 16-150 | 1×M8×45 |
| APG-B1 | Dina 16-35 | 2×M6×35 |
| APG-B2 | Al 16-70 | 2×M8×45 |
| APG-B3 | Al 16-150 | 2×M8×50 |
| APG-B4 | Al 25-185 | 2×M10×60 |
| APG-C1 | Al 16-70 | 3×M8×45 |
| APG-C2 | Al 16-150 | 3×M8×50 |
| APG-C3 | Al 25-240 | 3×M10×60 |
| APG-C4 | Al 35-300 | 3×M10×70 |
Parallel Groove Clamps Tambaga Extruded tipe
Clamp dirancang pikeun nyambungkeun dua konduktor bulistir paralel.Konduktor tiasa tambaga terdampar atanapi rod.Bahanna ngajalin tambaga pikeun sambungan tambaga sareng tambaga sapanjang rentang konduktor.The clamps geus serrated alur transverse pikeun kontak konduktor maksimum, ngagunakeun bolts tambaga jeung ngamangpaatkeun washers Belleville pikeun nyegah ratcheting termal dina beban siklik.Clamps dilapis ku inhibitor oksida.Sarta botls stainless sarta kacangan kalawan washers éta dina sarat.
Pikeun sambungan ketok-off tina tambaga-konduktor acc.Pikeun DIN 48201
Bahan
Awak: alloy tambaga
Bolts: baja atawa stainless steel Kacangan: DIN 934, baja Surface: uncoated
| Modél | Torsi Bolt | Rentang konduktor mm2 | Diménsi mm OD | No./Ukuran Bolts |
| CU6-70-2 | 20Nm | 6 nepi ka 70 | 2,7 ka 10,5 | 2×M8 |
| CU16-95-2 | 20Nm | 16 nepi ka 95 | 5.1 ka 12.5 | 2×M8 |
| CU16-150-2 | 30Nm | 16 nepi ka 150 | 5.1 ka 15.7 | 2×M10 |
| CU150-240-2 | 40Nm | 150 nepi ka 240 | 15.7 ka 20.3 | 2×M12 |
| CU300-400-3 | 40Nm | 300 nepi ka 400 | 22,6 ka 26,7 | 3×M12 |
